|
|
Request Information
|
Designed to use with the hot-melt version of 3M™ Jet-melt™ adhesives. This applicator
delivers up to 3.5 pounds of adhesive per hour. Has quadrack converter and palm trigger. Uses 5/8" x 8"
quadrack adhesive. 12 month warranty.
Weight: 13.8oz
Watts: 150
Volts: 120
Temp: 385F
|
|
Request Information
|
Designed to use with the hot-melt version of 3M™ Jet-melt™ adhesives. This applicator comes with
bench stand. Uses 1/2" x 12" AE hot melt smooth sticks.
Weight: 17.5oz
Watts: 150
Volts: 120
Temp: 350F
|
|
Request Information
|
Designed to use with the Hot-Melt Version of 3M™ Jet-melt™ Adhesives. The PolygunII is a
pneumatic applicator which delivers a up to 7.5 pounds of adhesive per hour. Has cartridge feed. Uses 1" x 3" PG hot melt quadrack
sticks. 12 month warranty.
Weight: 4.3 lbs
Watts: 500w
Volts: 120v
Temp: 385F
|
|
|
Request Information
|
Designed to use with the low-melt version of 3M™ Jet-melt™ adhesives. The Polygun™
LT delivers up to 2.6 pounds of adhesive per hour. Has quadrack converter and palm trigger. Uses 5/8" x 8"
quadrack adhesive. 12 month warranty.
Weight: 13.8oz
Watts: 150
Volts: 120
Temp: 265F
|
|
Request Information
|
Designed to use with the Low-Melt Version of 3M™ Jet-melt™ Adhesives. The PolygunII LT is a
pneumatic applicator which delivers up to six pounds of adhesive per hour. Has cartridge feed. Uses 1" x 3" PG low melt quadrack
sticks. 12 month warranty.
Weight: 4.3 lbs
Watts: 500w
Volts: 120v
Temp: 265F
|
|
|
Request Information
|
Designed to use with the Hot-Melt Version or Low-Melt Version of 3M Jet-melt Adhesives. The Polygun
EC with quadrack converter and palm trigger is a multiple temperature adhesive applicator that can be used for a wide range
of jobs. It provides multiple temperatures with choice of pre-set temperature jobs. It provides multiple module kits that
insert into the handle. 12 month warranty. Uses 5/8" x 8" Q hot melt quadrack sticks or 5/8" x 8" LMQ low melt quadrack sticks.
Weight: 24oz
Watts: 150w
Volts: 120v
Temp: 265-450F
|
|
Request Information
|
Designed for use with 3M Polygun EC. Module #1 temperature ranges are 262-283 degrees fahrenheit.
Jet-Melt Quadrack Adhesive Selection for Use of Module #1:
- 3762 LMQ
- 3776 LMQ
- 3778 LMQ
- 3792 LMQ
**Tests indicate that the use of LM Quadrack adhesives with Module #2 improves the flow rates without damaging most heat
sensitive substrates.
|
|
Request Information
|
Designed for use with 3M Polygun EC. Module #2 temperature ranges are 288-312 degrees fahrenheit.
Jet-Melt Quadrack Adhesive Selection for Use of Module #2:
- 3762 LMQ
- 3776 LMQ
- 3778 LMQ
- 3792 LMQ
**Tests indicate that the use of LM Quadrack adhesives with Module #2 improves the flow rates without damaging most heat
sensitive substrates.
|
