The Lincoln Legend® 5 is a self-contained 5 x 5 dot matrix ink jet coder designed for quick
installation and ease of use. This unit prints single line messages of ˝" (13mm) characters. The integrated controller,
keypad and LCD display allow for virtually effortless programming and you see your message as it will appear on the box.
The unit has the memory capacity to hold up to 41 different messages. Each message can be up to 39 characters long and can
include variables such as carton count, time and date. Parameters such as character width, dot size, and product delay are
unique to, and stored with, each individual message. The clearly visible low ink warning light on top of the unit alerts
you when the ink supply is running low. The disposable 1 liter ink container is housed inside the unit, and is designed to
be changed in seconds with no tools.
Specifications:
Power Requirements: 115± 10% volts Ac-60HZ, 300 watts max.
Other Voltages: 240 VAC at 50HZ. A dedicated power supply with an optional isolation transformer may be required
for optimum performance.
Operating Power: Less than 24 volts.
Operating Speed: Prints at rates up to 100ft/min (30m) standard depending on system setup conditions.
Character Font: 5 x 5 dot matrix.
Operational Variables: Product delay, character width, dot size, real time clock, Julian date, message selection,
box count, time and date change, individual valve settings.
Character Set: Full ASCII 64 character uppercase set; 39 characters per message line standard.
Print Direction: Forward and/or reverse.
Character Size (height): 1/2" (13mm).
Ink System Capacity: One-liter disposable ink container.
Dimensions: 12"L x 6"W x 4"H (300mm x 150mm x 100mm).
Engineered for high speed, large volume applications, the DMX-I-4212 boasts a print speed up to
12 inches per second (304mm/sec). Not only is this the fastest printer in the Datamax I-Class Series, it also provides
the fastest label through put of any like product. By combining high speeds with I-Class rugged precision crafted die-cast
aluminum frame, the I-4212 is the ideal choice for your high volume, mission critical printing applications, either on-demand
or in batches.
The I-Class supports a 4.65 inch (118mm) maximum label width making the product ideal for labeling applications in industrial,
commercial, business and clinical environments. A field installable flash/font expansion card allows for storage of label
formats, graphics, downloadable fonts and international language print capabilities, thus minimizing formatting download time
and maximizing printer output.
Standard Features:
A powerful 32-bit multi-tasking processor and a industry leading 16MB of addressable RAM
An easy-to-read font LCD display
Color coded operator cues
Embossed media loading diagrams
Easily accessible printhead mechanism
A unique collapsible ribbon hub that makes loading and unloading a snap
Flash upgradeable firmware
Engineered to Protect your Investment:
Modular design facilities adding and/or changing options with ease
Easy to upgrade and reconfigure for business growth
Extremely easy to maintain-change the printhead and the platen roller in less than 5 minutes
Standard bi-directional parallel and high-speed serial interfaces allow easy integration into your system
Optional USB, Ethernet and Twinax/Coax support allows the printer to connect to virtually any host system environment
The Datamax I-Class Series has what it takes to solve you barcode printing needs. When it comes to high-speed, large volume,
mission critical applications, there is just one choice-the Datamax I-Class 4212. It's the industry's answer to your high
performance printing needs.
The Label-Aire® Model 3111 combines high-speed application of up to 1500" (2000" optional) of pressure-sensitive label web per
minute with exceptional placement accuracy of ±0.03".
This model accepts a wide variety of label sizes due to its advanced honeycomb grid at the labeling point. Its air-blow applicator
allows non-contact application in any attitude: top, bottom or side.
Common errors such as double-labeling or a missed product are eliminated due to peel-tip sensing that further assures labeling
accuracy. Consistent, reliable operation also is assured by microprocessor controls that allow repeatable settings and constant
monitoring.
In addition, the 3111 is durable even in harsh environments due to its corrosion-resistant, stainless steel and anodized aluminum
casing. Pop-off rollers are removed easily for fast cleaning and replacement, and the unit can be moved from one production line to
another when mounted on Weber's castered T-base.
For simultaneous label print-and-apply applications, the Model 3111 can be combined with a Weber thermal/thermal transfer printer.
Specifications:
Dimensions: 35.5"L x 21.9"W x 26.5"H (85cm x 55.6cm x 67.3cm)
Power Supply: Completely solid-state; located in pull-out module drawer
Air Requirements: 2 cfm at 60 to 90 psi for most applications
Product Sensing: Photoelectric
Label Roll Size: 12.0" O.D. (305mm) wound on 3.0"(76mm) core; [16" (406mm) with power driven unwind optional]
Label Styling: Die-cut, waste removed with minimum of 0.125" (3mm) separation between labels in running direction
Label Placement Accuracy: Placement can be held to ±0.03" (0.8mm) when labels are produced to specifications and product
handling is controlled
Standard Label Sizes: Maximum- 4.13"W x 5.5"L (105mm x 140mm) Minimum- 0.88"W x 0.75"L (22mm x 19mm)
Labeling Speed: Up to 1500 linear inches (38.1 meters) of label web per minute standard Up to 2000 linear inches
(50.8 meters) optional
Application Method: Air-blown
Options include extended grids for larger label sizes, hot stamp imprinters, snorkels, low label alarm, web break alarm, label
counter, right- or left-hand unit.
