Clamco's L-sealer/tunnel combination system includes such standard features as unitized package tray
and film cradle with pinwheel perforator, the largest shrink tunnel in its class, and 11-gauge steel construction
throughout. The resulting high throughput and superior strength are further enhanced by this system's efficient 120-volt
operation. In addition, its comparatively lower price makes the 120 Series the best value in its category.
The 120 Series semi-automatic shrink packaging system includes many standard features and unique
advantages not found on competitive systems. Its low cost and 120-volt efficiency make it ideal for today's quick
print and similar-sized operations. It is designed to seal and shrink most polyolefin and PVC films.
Standard Features:
Unitized sealer/tunnel combination with console stand
Microprocessor-controlled heat cycle with automatic temperature compensation
2100 watt tunnel heating power: 360-degree air circulation
Height-adjustable, heavy duty seal head with stainless steel film clamps
Unitized, adjustable package tray and film cradle with pinwheel perforator and variable brake
Magnetic hold-down featuring adjustable, single large magnet
Film burn-off control
Variable-speed TeflonŽ coated mesh belt tunnel conveyor
Made in U.S.A.
Specifications:
Seal area 16"W x 20"L (41cm x 51cm)
Tunnel chamber 16"W x 20"L x 8"H (41cm x 51cm x 20cm)
Overall dimensions 24"W x 91"L x 52"H (61cm x 229cm x 119cm)
11-guage steel constructions throughout
120V operation (export voltages available)
Optional Features include powered take-away conveyor (variable distance, adjustable height), locking casters,
scrap take-up wheel, 200/208V single phase power, auto cool down timer for tunnel, and cycle counter.
The 770 Series L-Sealers offer an outstanding package of standard features and are available in a wide variety of seal area
sizes and option packages for effective selection of the best shrink packaging machinery for the job intended. With the 770
series you can truly achieve maximum cost effectiveness in the purchase of your shrink packaging system.
Standard Features:
Microprocessor controlled heat cycle with temperature compensation
Film burn off control
Height adjustable seal head with film clamps
Adjustable package tray
Adjustable seal pads
Pin wheel perforator or impulse hole punch
Designed to seal most polyolefin, polyethylene, and PVC films
Seal area sizes from 15" x 15" up to 30" x 48"
Unitized film separator tray and film cradle with adjustable brake
One year limited warranty
Operates on 120V up to 30" x 36" sealing area, larger operate on 220V, single phase
Intermediate production level machinery
Heavy gauge steel construction
Made in U.S.A.
Export wiring available
Optional features include heavy duty console stand with casters and levelers; magnetic hold down, featuring two or more
adjustable magnets; power take away conveyor; scrap take up wheel; and electrical hole punch.
Unique recirculating bottom air flow heat transfer system envelops the products with hot air quickly and efficiently providing
optimum shrink wrapping at the lowest possible cost. An exceptional value, each tunnel in the 850 series offers such standard
features as high effeciency finned rod heating elements,a fully insulated heat chamber, heavy duty conveyor, and height
adjustable consoles that include casters and levelers.
Standard Features:
All 850 Series Heat Shrink Tunnels
Fully insulated heat chamber
Variable speed conveyor
Digital precision temperature control
Automatic cool down
High efficiency finned rod heating elements
Bottom air flow heat transfer system
USDA approved
220V, single phase, 29 amp
6000 watts of heating power
850 Shrink Tunnel
Chamber opening - 15"W x 28"L x 8"H (38cm x 71cm x 20cm)
Variable speed 48"L Teflon mesh belt conveyor (0 to 70 FPM)
Overall dimensions 48"L x 22"W (122cm x 56cm)
Approximate shipping weight - 225 lbs. (102kgs.)
851 Heat Shrink Tunnel
Chamber opening - 15"W x 28"L x 8"H (38cm x 71cm x 20cm)
Adjustable console stand (32" to 36" from the floor) with casters and levelers
Overall dimensions 48"L x 28"W x 53" - 57"H (122cm x 71cm x 135cm - 145cm)
Approximate shipping weight - 400 lbs. (181kgs.)
Optional features include 1.5" and 1" roller spacing (851 and 852 only), Teflon mesh belt overlay for 851 and 852, console
stand with casters and levelers for 850 and 851, and directional air controls.
The Clamco 6022 offers great performance in a smaller-size chamber design for medium and intermediate applications. Features include
9,000 watts of heating power, 3/4 horsepower blower, and much more. The diverse 6022 is ideal for use with automatic and
semi-automatic sealers - and it's value priced for excellent sealer-tunnel combo affordability.
Standard Features:
Chamber opening 22"W x 34"L x 10"H
9,000 watts of heating power
Variable-speed, live/dead roller conveyor
Air-cooled controls
Fully insulated heat chamber
Precision digital temperature control
Automatic cool down
360° air flow heat-transfer system with 3/4 HP blower
Double entry and exit curtains for great efficiency
Adjustable levelers
USDA approved
Made in U.S.A.
One-year limited warranty
Specifications:
230V, single phase, 48 amps
Overall dimensions: 60"L x 38"W x 63"H
Otions include 1" roller spacing, casters, integrated controls with 6700 Series Automatic L-Sealers, and mesh belt conveyor.
The 5000 Series L Sealers are heavy-duty production console sealers which have a powered automatic package take-away conveyor. With
the automatic take-away conveyor, the operator can produce up to fifty percent more packages in any production period. There are two
types of sealers in the 5000 Series; an air operated unit and an electromagnetic unit. With the air operated unit, the arm is actuated
by an air cylinder. The operator, after inserting a package in the film and moving the package to the seal area, pushes two buttons
on the front of the machine starting the sealing cycle. While the next package is being inserted by the operator, the sealing arm
automatically seals the package, returns to the up position, and the package is automatically conveyed to the shrink tunnel. The
electromagnetic unit operates in the same sequence except that the arm is brought into the sealing position manually by the operator.
This actuates the magnetic hold-down and initiates the automatic cycle to complete the package and move it automatically to the shrink
tunnel. Electronically timed 0 to 5 seconds pressure dwell control is standard. This is a requirement when sealing polyolefin films.
The 0 setting permits the sealing of PVC and polyethylene films. Solid state electronic controller with an internal adjustable heat
compensator provides positive sealing element temperature with every cycle. Optional film inverting head and power unwind system
permits the inline feeding of the product, for easy transfer of package into the seal area.
Standard Features:
Air operated sealing arm with safety system
Electromagnetic held sealing arm
Positive sealing element temperature control
Dwell control
Adjustable sealing pads
Power take-away conveyor
Heavy-duty construction
Specifications:
Electrical Requirements: 220 volt, single phase, 3 wire, 10-15 amp
Air Requirements: 5 CFM at 65 psi
Accessories include film inverting head with power unwind, conveyor - sealer to tunnel, hot hole punch, electrical hole punch,
pneumatic die punch, and vacuum scrap removal (less container).
The Clamco 6700 has the advantages you need - enhanced Allen-Bradley microprocessor PLC,
touch-screen interface and I/O diagnostics, memory for up to 20 package sizes, PLC and interface tunnel controls,
self-adjusting scrap take-up wheel, microperforators for uniform air evacuation - and much more. All resulting
in an automatic L-bar sealer with outstanding speed, throughput and performance to maximize productivity and profits.
Standard Features:
Allen-Bradley microprocessor or base controller (PLC)
Touch-screen interface with diagnostics
Product memory for up to 20 package configurations
Heavy-duty hot knife sealing system with 18" x 23" seal area
Lower film cradle with film splitter and static eliminator
Adjustable height sealing jaws for products up to 8" high
Product alignment guides
Horizontal and vertical product sensors
Variable speed conveyors - 15 to 100 fpm
Package speed up to 40 per minute (depending on package size and film type)
Self-adjusting scrap take-up reel
Micro-Perf perforators for uniform air evacuation
Variable-speed film unwind
23" maximum film width
Casters and levelers
Made in U.S.A.
One year limited warranty
Specifications:
110V, 1 cfm, 80 psi, 120V, 15 amps
Overall dimensions: 69"L x 50"W x 51"H
Options include various seal knife options, tunnel controls integrated through PLC and interface (7221 and 6022 Tunnels),
closing conveyor, printed film registration, split conveyor for product staging, and light package takeaway.
Clamco's 7220 Series is the choice for tough, dependable long-life performance in continuous
production environments. Constructed of heavy-gauge structural steel, Model 7221 features a heavy-duty blower,
variable air velocity control, digital heat control, and a variable-speed roller conveyor that instantly adjusts
between live and dead. The Model 7221 production shrink tunnel combines advanced design precision with tough,
time-proven features - expertly crafted by Clamco, the industry's respected name for steadfast reliability and value.
Standard Features:
Digitally controlled heat to 450°F (232° C)
Variable air velocity control
Separate shrink chamber and conveyor
Fully insulated heat chamber
Air-cooled controls
Double entry and exit curtains for greater efficiency, and minimum heat loss
Adjustable heat pattern
Sturdy steel base
Live/dead roller conveyor
Made in the U.S.A.
Specifications:
Shrink chamber area 22"W x 10"H (56cm x 25cm)
Silicone-covered roller conveyor
Conveyor speed 0-125 fpm
Conveyor dimensions 20"W x 71"L x (maximum) 67"H (89cm x 180cm x (maximum) 170cm)
Electrical requirements 230V, 48A, 3Ph
Heater bank 14,500 Watts
Optional features include additional roller - 1.5" or 1" roller spacing, fiberglass mesh or stainless steel mesh conveyor,
stainless-steel construction, and spare parts kit.
The low-cost, high-speed shrink wrap alternative! Clamco's patented shrink film wrapping 1700 System features a rotary hot knife
side seal attachment, production speeds up to 80 packages per minute, a maximum seal width of 17 inches, easy touch screen
operation and much more. Combined with our rugged 860 Heat Shrink Tunnel, this systems gives you high speeds at less cost.
Standard Features:
Patented shrink film wrapping machine
Patented rotary hot knife side seal machine
PLC controls
Touch screen operator interface for all machine controls
Variable speed infeed systems
Variable speed, Venturi vacuum belt
Variable speed cast steel seal knife seals most polyolefin and PVC films
Pin perforator system
Obstruction detectors on end seal system
Fully closed end seal system with E-stop
Quickly adjustable seal centering system
One year limited warranty
Standard Controls on Touch Screen:
All product set-up features (i.e. - product length, speed, etc.)
Fault troubleshooting ability
Hot knife temperature set point and independent feedback
Infeed, vacuum belt, and end seal motor speeds, counter
The Model 17-80S Wrapper includes all of the above standard features, plus:
17" wide by 6" high end seal knife system
Up to 80 cycles per minute
Patented continuous motion, rotary hot knife system that seals most polyolefin films
Eight foot infeed conveyor
Crank adjustable inverting head
Crank adjustable side seal for quick product changeover
Scrap film take up wheel
Specifications:
Maximum package length 23" (58cm)
Maximum film speed 90 FPM
Maximum film width 36" Flat film, 21" Centerfold film
220V, single phase, 20 amp
Overall dimensions 147"L x 49"W
Optional features include PVC seal system, automatic product feed systems, machine casters, vacuum scrap removal system, and
stainless construction.
Clamco 7000 Series semi-automatic sleeve wrapper provides an economical means of packaging a product or a cluster of products
in an open-ended envelope of shrink film. Benefits include reduction of packing costs, product identification, increased packing
speed, reduced pilferage and reduced packing material storage. The operator feeds the product into the curtain of film by hand,
then actuates two push buttons starting the sealing cycle. Pneumatically operated jaw lowers, sealing and cutting the film. As
the jaw returns, the automatic discharge conveyor removes the package. The operator then repeats the operation. The start buttons
will ensure that hands are well clear of the closing seal bar. In addition, a pressure switch is also included which will cause
the bar to reverse its motion if obstructed. The impulse heating system provides heat only when the bar is closed.
Specifications:
Electrical Requirements: 230/volt 15 amp single phase
Clamco's new semi-automatic C Series Sleeve Wrappers are heavy-duty workhorses designed to easily handle thicker materials.
Quality-built in North America for dependable performance, they feature dead plate infeed tables, dual push-button controls,
air-operated sealing head, automatic motorized product discharge conveyor and more. Maximum operating speeds are six to eight
packages per minute. The C Series offers it all in a choice of seal area sizes.
Standard Features:
Easy-load film loading system
Independent upper and lower adjustable speed motorized film unwind systems
Dead plate infeed tables
Dual push-button controls
Linear bearing-mounted air-operated upper and lower seal heads (TeflonŠ coated)
Electronic time-proportional controller for seal temperature
Automatic motorized product discharge conveyor
Heavy-duty welded structural steel tube construction
The B Series are basic semi-automatic models equipped with dead plate infeed tables, twin safety push-button controls, air operated
sealing head and automatic motorized product discharge conveyor. Maximum operating speeds are 6-8 per minute.
The B Series sleeve wrappers are available in 5 models:
B24 - 24" Seal Bar Width
B34 - 34" Seal Bar Width
B44 - 44" Seal Bar Width
B54 - 54" Seal Bar Width
B64 - 64" Seal Bar Width
Specifications:
Independent upper and lower adjustable speed motorized film unwind systems
Adjustable speed product takeaway conveyor
Linear bearing mounted air operated upper and lower seal heads
Teflon coated aluminum seal head
Electronic time proportional controller for seal temperature
Easy-load film loading system
Heavy duty welded structural steel tube construction
Epoxy paint finish
Heavy duty casters
The most commonly used Shrink Tunnels with this model Sleeve Wrapper sre the Series Heavy Duty Shrink Tunnels. All machines
can be supplied in various colors for a slight upcharge.
The B-180 Series are fully automatic, in-line systems with infeed conveyor, photo-cell product sensing, automatically operating
pneumatic sealing head and automatic motorized product discharge conveyor. Length of infeed and discharge conveyors varies with size
of machine. Maximum operating speeds are 12-15 packs per minute.
The B-180 Series sleeve wrappers are available in 6 models:
B24-180 - 24" Seal Bar Width
B34-180 - 34" Seal Bar Width
B44-180 - 44" Seal Bar Width
B54-180 - 54" Seal Bar Width
B64-180 - 64" Seal Bar Width
B74-180 - 74" Seal Bar Width
Specifications:
Upper and lower adjustable speed motorized film unwind systems
Infeed conveyor
Adjustable speed product takeaway conveyor
Linear bearing mounted air operated upper and lower seal heads
Teflon coated aluminum seal head
Electronic time proportional controller for seal temperature
PLC controlled electrical functions
Easy-load film loading system
Heavy duty welded structural steel tube construction
Epoxy paint finish
Heavy duty casters
The most commonly used Shrink Tunnels with this model Sleeve Wrapper are the S Series Heavy Duty Shrink Tunels. All machines
can be supplied in various colors for a slight upcharge.
The B-180-HS Series are fully automatic in-line high speed sleeve wrapper with automatic separation type infeed system,
photo-cell product sensors, automatically operating pneumatic seal head and automatic product discharge conveyor. Speeds to
30 packages per minute depending on product size.
The B-180-HS Series sleeve wrappers are available in 2 models:
B24-180-HS - 24" Seal Bar Width
B34-180-HS - 34" Seal Bar Width
Specifications:
Upper and lower adjustable speed motorized film unwind systems
Infeed conveyor
Adjustable speed product takeaway conveyor
Linear bearing mounted air operated upper and lower seal heads
Teflon coated aluminum seal head
Electronic time proportional controller for seal temperature
PLC controlled electrical functions
Easy-load film loading system
Heavy duty welded structural steel tube construction
Epoxy paint finish
Heavy duty casters
The most commonly used Shrink Tunnels with this model Sleeve Wrapper are the S Series Heavy Duty Shrink Tunnels. All machines
can be supplied in various colors for a slight upcharge.
The B-90 Series are fully automatic sleeve wrappers with automatic product infeed conveyor feeding either from right or left of
machine. Micro switch product sensing, automatically operating pneumatic sealing head and automatic motorized product discharge
conveyor are standard features. Product loading options include single row patterns, row collating, product up-stacking, and
multi-lane infeeding. Maximum operating speeds are 12-15 packs per minute.
The B-90 Series sleeve wrappers are available in 6 models:
B24-90 - 24" Seal Bar Width
B34-90 - 34" Seal Bar Width
B44-90 - 44" Seal Bar Width
B54-90 - 54" Seal Bar Width
B64-90 - 64" Seal Bar Width
B74-90 - 74" Seal Bar Width
Specifications:
Upper and lower adjustable speed motorized film unwind systems
Infeed conveyor
Adjustable speed product takeaway conveyor
Linear bearing mounted air operated upper and lower seal heads
Teflon coated aluminum seal head
Electronic time proportional controller for seal temperature
PLC controlled electrical functions
Easy-load film loading system
Heavy duty welded structural steel tube construction
Epoxy paint finish
Heavy duty casters
The most commonly used Shrink Tunnels with this model Sleeve Wrapper are the S Series Heavy Duty Shrink Tunnels. All machines
can be supplied in various colors for a slight upcharge.
The FS Series Form/Fill/Sealers are fully automatic shrink packaging systems designed to wrap and shrink your product at speeds
of up to 40 packs per minute for the FS 1 and 25 packs per minute for the FS 2. Ideal for situations where the product is a dedicated
size or a dedicated height, the FS offers a simple solution for packaging your product.
The FS 1 Series sleeve wrappers are available in 2 models:
FS1-14 - 14" Seal Bar Width
FS1-24 - 24" Seal Bar Width
The FS 2 Series sleeve wrappers are available in 3 models:
FS2-14 - 14" Seal Bar Width
FS2-24 - 24" Seal Bar Width
FS2-34 - 34" Seal Bar Width
FS 1 Series Specifications:
Vacuum belt infeed
Custom made film forming plow
Static, drag wire or hot melt longitudinal seal system
Reciprocating action across seal
Speeds up to 40 packs per minute
Heavy duty all welded steel tube construction
Optional types of infeed with automatic product collating and loading
FS 2 Series Specifications:
Vacuum belt infeed
Custom made film forming plow
Static, drag wire or hot melt longitudinal seal system
Speeds up to 25 packs per minute
Heavy duty all welded steel tube construction
Optional types of infeed with automatic product collating and loading
