Broad Range of Functions: Gently, but firmly straps from 30 to 380 mm in width
User Friendly Design: Three types of operation, single acting and continuous operation and pause. Firm strapping of any
type of product
Accommodates Various Product Requirements: Strapping is performed by means of a three stage
tightening adjustment to match the merchandise: firm for hard products and gentle for soft products
15 Second "Quick Start": You can start just 15 seconds after turning the machine on
Neat Joint: Makes a neat and secure joint through two-point heat deposition and knife cutting
High Safety: Features a safety design. When operation is interrupted for 10 minutes, the heater power automatically turns off
Simple Tape Replacement: The tape is easily loaded into the tape holder and inserted into the guide
Machine Options: Foot Switch or Table Top Guide
Specifications:
Arch Size: 380mm W x 200mm H (15"W x 8"H)
Tape to be Used: 30mm W x 190m long (1.2" W x 623 ft)
Capacity: 24 Straps/min
Tension: 0.5-3.0kg adjustable (1.1-6.6lbs)
Package Size: Min: 30mm W x 10mm H (1.2" W x 0.4" H) Max: 380mm W x 200mm H (15" W x 8" H)
Power Supply: Single Phase
Machine Size (WXDXH): 570mm x 320mm x 490mm (22" x 12.6" x 19.3")
Specially designed for coiled products, with a small I.D., e.g. hose, cable, wire, tubing and etc.
Features and benefits:
Fast: The EMT-AXRO can apply up to 94 ties per minute
Versatile: Can tie extremely small products with light tension, or large bundles with high tension. Can operate with
either EC-38W and EC-38B single cord, or EC-33 three cord.
Reliable: The entire cycle is controlled by a single rotation of the camshaft. Very few moving parts, all of which are
of the highest quality.
Safe: The cycle is started by table top switch only. The tying arm will stop automatically if it meets any resistance.
Specifications:
Production Speed;
94 Ties per minute
Bundle Height:
6.1"
Power Supply:
115 VAC, 1 Ph. 60 HZ
Machine Dinesions:
22" l x 18" w x 28" h
Elastic Cord Data:
EG-38W, EG-38B: 3,800'/roll, single core
EC-33: 1,600'/roll, three core
The Omega is a high speed automatic strapping machine designed for printing, mailing, and applications
requiring reliability and high speed.
Features and benefits:
High Speed: Up to 50 straps per minute
Auto Eject and Self Threading: This machine automatically ejects the last few feet of strap and is then prepared
for a new coil. After a new coil is installed, the end of the strap is inserted into a slot and the machine automatically
feeds the strap into the arch and is ready to run
Easy to Operate: The Omega can be cycled by foot switch, push buttom or photo eye start switch
Adaptable Controls: Control panel includes main power, hi-lo tension range & start switch. Internal controls
include jog switch, heater control, weld cool timer & photo eye controls
Specifications:
Production Speed:
50 straps per minute
Power Supply:
120 volts, Single Phase, 60HZ
Strap Tension:
From 1 to 85 lbs
Strap Width:
5mm, 6mm or 3/8" polypropylene on 8 x 8 core only
Packaging Sizes:
Minimum- 3-1/2" W x 2" H Maximum- to inside of arch
Strap tension ranges from 4.5lbs up to 154 lbs and is easily adjustable. This eliminates damage to the package
when strapping soft materials and provides high tension for heavy cartons
Strapping cycle of 1.5 seconds providing high production. Machine can apply up to 40 cycles per minute with
standard arch of 24Wx20H
Proximity switches provide improved reliability and durability due to the adoption of proximity switches for all
sensors which is related in movement of the engine unit
Re-try function is engaged when strap feeding fails, the machine will try to feed the strap again automatically
to be ready for next strapping
Loop ejector clears unwanted strap automatically, if machine is operated in error
Strap loading is fully automatic from outside the body at a high level making it easy for the operator to change the strap coil
Fully automated strap eject at end of reel (optional). Strap that remains in the machine is ejected automatically
when the coil is used up
Emergency stop button is equipped as standard specification
Large size castors to help move the machine smoothly
Easy PC board replacement. All operating functions such as strap feed, strap tension and heater bar temperatures
are controlled by a printed circuit board. In the event of a circuit failure, replacement is a quick and easy operation
Automatic motor shut-off if not used within 60 seconds. Offers instant resumption of operation when needed
Heater blade reaches operating temperature in just 5 seconds and maintains an optimum operation level thereafter
High speed transmission with electromagnetic clutch, allows for excellent performance of only 1.5 per second cycle,
providing less wearing components, for better reliability and longevity
Capacitor start motor reduces the "start" current of the motor to prevent overheating
Unique heater elements avoids electric leakage, short circuits and lenghtens the life of the heater blade
Adjustable package guides ensure positioning accuracy of package over sealing head
Accepts strap sizes 1/4", 3/8" or 1/2" with no additional parts required
Through the use of an outside adjustable knob the strap tension can be adjusted up to 132 pounds without
the need to open the top cover
Low voltage control circuit for operator safety
Casters for portability
110 volt allows for use anywhere in the facility
Feed button control for preOset strap lenghts
Simple touch of the reset button automatically returns machine to it starting position
Reversible cutter blade for greater cutting life
All electrical poser cuts off when doors or table top is open
Hinged, interlocked cover provides safe, easy access to strapping mechanism for maintenance, cleaning or tension adjustment
